SAF-HOLLAND SK RB 9019 W, Руководство по обслуживанию и ремонту

Страница: 3 / 30

SAF axle identification 2
Notes 4
Repairing the brakes 14-20
Replacing pressure pad and folding bellows 20
Replacing the folding bellows of the pressure pad 21-22
Repairing the brake calliper bearing with “guide and seal kit” 23-25
Installing the brake calliper 26
Replacing the brake cylinder 26
Overview of Hub Unit components 27
D) Installation instructions
B) Maintenance instruction
Maintenance instructions for SAF axles
SK RB 9019 W - SK 1000 ET 120
6
Maintenance schedule for SAF axles
SK RB 9019 W - SK 1000 ET 120
7
Brake testing (fault-finding procedure) 8
Adjuster check 9
Brake pad check 10
Special notes 11
3
Contents
Page
This manual is intended for the technical workshop personnel responsible for maintenan-
ce and repair.
A) General safety instructions 5
E) Service tools 28
F) Tightening torque in Nm 29
The item numbers indicated are given only for identification and to distinguish between different versions.
Use the part numbers from the valid spare parts documents for identification of spare parts.
SAF axles and suspension units are subject to continuous further development; the data and drawings
contained in the manual may therefore differ from the details given in the operating permit.
The contents of the manual does not constitute the basis for a legal claim.
Reprinting, reproduction or translation in whole or in part is not permitted.
The issue of this publication invalidates all earlier maintenance and repair manuals.
Note: We wish to thank WABCO for providing various illustrations!
Spare part illustration and spare part designation
SK RB 9019 W - SK 1000 ET 120
12-13
C) Spare part illustrations/spare part designation