25
D) Installation instructions
Grease the running surfaces for the guide pins 70.1/80.2 and the
rim lip of the protection cap 80.
Insert the
new
guide pins from the direction of the cylinder into the
brake calliper 59 and push the protection cap 80 against the seating
of the guide pins 70.1/80.2.
Lightly move the guide pins backwards and forwards several times
as illustrated in the sketch.
The longer guide pin 70.1 is the shoulder bolt and is fitted on the
brake disc run in side. The shorter guide pin 80.2 is the play bolt
and is fitted on the brake disc run out side.
Remove excessive grease. The flat surfaces of the guide pins to the
brake mounting (arrow) must be free of grease!
Seat the brake calliper 59 onto the brake mounting 61 and insert
the fitted guide pins 70.1/80.2 flush.
Fit the new screws 70.6 (long for the shoulder bolt 70.1), 80.1
(short for the play bolt 80.2) through the previously fitted guide
pins in the brake calliper 59 and screw the brake calliper to the
brake mounting 61.
Tightening sequence: 1st screw 70.6 / 2nd screw 80.1
Note!
It must be ensured during tightening of the screws when
assembling that the protection cap 80 is not damaged or rotated.
First, screw tightly the slide fit longer guide pin 70.1 and then
screw tightly the running fit shorter guide pin 80.2.
Should the guide pins 70.1/80.2 be loosened during maintenance
work from the brake mounting 61, then these must be replaced
with new screws 70.6/80.1 when re-assembling.
Move the brake calliper several times backwards and forwards over
the guide pins 70.1/80.2. Ensure ease of movement.
Note!
Do not squash the guide pins against the brake mounting!
Grease the holes for the cover plate 83 in the brake calliper 59.
Insert the
new
cover plate 83 into the holes of the brake calliper 59
and press home using a suitable tool.
Note!
Avoid damaging the cover.
70.1/80.2
80
80.1
70.6
70.1
80.2
80
80.2
70.1
F
F
83
83
59
59
80
Содержание SK RB 9019 W
Страница 4: ...NOTIZEN NOTES NOTE 4...
