control handle, as indicated in the illustration. In position “0” the cast-iron knob is fully recessed in the
sidewall, and in position “l” it is fully extended (see: division on inner surface of the side wall).
Removing the ash pan before cleaning
Depending on the quantity of ash, the ash pan must be emptied regularly
– certainly before the level of
the
ash reaches the grate. To do this, hook the pin of the control handle into the front plate of the ash pan
and
carefully pull it out of the appliance so that it can be emptied.
Removal of the grates
After regular use (depending on the quantity of ash), the grates must be cleaned thoroughly. To do
this,
remove the standing grate on the front from its supports and then remove the wood grate from the
frame.
After the ash pan has also been removed from the appliance and the appliance has cooled down
completely, it can be cleaned with a vacuum cleaner.
53
Removing the inspection cover