Saey Fenix 60 Optic, Руководство по эксплуатации

Страница: 10 / 28

S
AEY
FENIX / SAEY FENIX VITRO
810.6011.000 / 02
62
English
5.4 Combustion air
Unlike an ordinary insert, a SAEY stove uses very little combustion air. In most homes the air flow
through the gaps and chinks in doors and windows is enough. Nevertheless, in some highly
insulated homes the air flow may be insufficient. In this case, a ventilation grill must be placed in
the outer wall as close as possible to the appliance.
Under no circumstances should air be drawn from rooms or cellars containing volatile or
flammable substances.
The Saey insert can only be used when the stove door is closed. For the amount of used air, see
table in point 12.
Consideration must be given to any other hearths or air extraction installations in the same space
or that share the same combustion air connection, which can compromise the operation of the
insert. The grille that provides incoming air must not be blocked.
If necessary the combustion air connection must be calculated or a separate combustion air supply
system must be installed outside.
If there is still a backdraught of flue gases 15 minutes after lighting because of the weather
conditions (strong wind or fog, for example) the fire should be extinguished until the weather
improves.
Tip: Consideration must also be given to cooker hoods which may be connected to the
space in which the stove is installed. They cause under pressure, which can lead to a
malfunction in the combustion air supply. The combustion gas which results can damage
residents' health and even cause
.
Combustion air supply
Traditional system : combustion air is drawn in through the vent low down, under the plate which
also covers the switch for the fan.
5.5 Clearance to be respected around the stove
Safety distance to inflammable or temperature-sensitive items:

Within the line of sight of the glass: at least 80 cm

Floor protection in front:: at least 50 cm