English
• 17 •
• After 50cc of water has
fl
owed out, press the coffee switch
(16) again to stop hot water dispensing.
•
(Fig.16)
- Remove the
fi
lter holder from the machine by
turning it to the left and pour out any water left. As the
machine is
fi
tted with the special
fi
lter holder (13), there is
no need to change the
fi
lter to make one or two coffees.
•
(Fig.9-B)
- Add 1 or 2 level measuring scoops of ground
coffee to the
fi
lter for one or two coffees; clean any coffee
residues from the edge of the
fi
lter holder.
•
(Fig.11)
- Insert the
fi
lter holder (13) in the brew unit from
the bottom (2).
•
(Fig.12)
- Turn the
fi
lter holder from left to right until it
locks in place.
•
(Fig.13)
- Take
1 or 2 preheated cups
and place them
under the "Crema"
fi
lter holder; check that they are cor-
rectly placed under the coffee dispensing holes.
•
(Fig. 14)
- Press the coffee button (16).
• When the desired quantity of coffee has been obtained,
press the coffee button again (16) to stop the coffee
brewing and remove the cups of coffee
(Fig.15)
.
•
(Fig.16)
- Wait a few seconds after brewing, then remove
the “Crema”
fi
lter holder and empty the remaining coffee
grounds.
Note: If a small quantity of water remains in the
porta
fi
lter; this is absolutely normal and is due
to the porta
fi
lter features.
Note For cleaning: keep the
fi
lter of the “Crema”
fi
lter holder clean by removing it from its seat
and washing with drinking water (Fig. 17).
5.2 Coffee
pods
•
(Fig.9-A)
- Remove the ground coffee
fi
lter (12) from the
“Crema”
fi
lter holder (13) by pulling it up.
•
(Fig.10)
- Insert the coffee pod adapter (14), with the
curved part facing down, into the “Crema"
fi
lter holder
(13); then insert also the
fi
lter (15).
•
(Fig.11)
- Insert the "Crema"
fi
lter holder in the Brew unit
from the bottom (2).
•
(Fig.12)
- Turn the
fi
lter holder from left to right until it
locks in place.
• Release the grip from the “Crema"
fi
lter holder. The handle
is automatically turned slightly towards the left.
This movement assures the perfect functioning of the
“Crema"
fi
lter holder.
•
(Fig.14)
- Preheat the “Crema”
fi
lter holder by pressing
the coffee switch (16). Water will spill out of the “Crema”
fi
lter holder (this operation is only necessary for the
fi
rst
coffee).
• After 50cc of water has
fl
owed out, press the coffee button
(16) again to stop hot water dispensing.
•
(Fig.16)
- Remove the “Crema”
fi
lter holder from the
machine by turning it from right to left and emptying out
the remaining water.
• Insert the pod in the
fi
lter holder;
make sure the paper
from the pod does not overhang the
fi
lter holder.
•
(Fig.11)
- Insert the "Crema"
fi
lter holder in the Brew unit
from the bottom (2).
•
(Fig.12)
- Turn the
fi
lter holder from left to right until it locks
in place.
• Take
1 preheated cup
and place it under the filter
holder; check that it is correctly placed under the coffee
dispensing holes.
•
(Fig.14)
- Press the coffee button (16).
• When the desired quantity of coffee has been obtained,
press the coffee button (16) again to stop coffee brewing
and remove the cup of coffee.
•
(Fig.16)
- Wait a few seconds after dispensing, then
remove the
fi
lter holder and dispose of the used pod.
Note for cleaning: keep the
fi
lter of the “Crema”
fi
lter holder clean by removing it from its seat
and washing with drinking water (Fig. 17).
6 TIPS FOR CHOOSING COFFEE
As a general rule any type of coffee available on the
market can be used. However, coffee is a natural product
and its
fl
avour changes according to its origin and blend;
it is therefore a good idea to try different types of coffee in
order to
fi
nd the most suited to your personal taste.
For optimal results, however, we recommend using
espresso machine blends. As a rule, Coffee should always
come out of the porta
fi
lter without any dripping.
The speed of coffee dispensing can be modi
fi
ed by slightly
changing the amount of coffee in the
fi
lter and/or by using
a different coffee grind.
Saeco recommends using single-dose coffee pods marked
ESE for a tasty coffee and easier cleaning and preparing.
BEFORE USING THE HOT WATER/STEAM
JET, MAKE SURE THAT THE STEAM SPOUT
(PANNARELLO) IS POSITIONED OVER THE DRIP
TRAY.
