English
8
42
MENU ITEM
Description
On
To activate the acoustic alarms.
Ecomode
This function controls the temperature management in the coffee boiler when the
machine is in the “ready for use” mode.
The function is set by default to «OFF».
The currently active setting is inside a dotted rectangular box.
Off
This way, the coffee boiler is constantly kept at the right dispensing temperature.
In this mode, the power consumption is higher because the machine is always ready for
use.
On
This way, when in off position, the coffee boiler is kept at a temperature lower than the
one required when dispensing a beverage.
This way, the machine saves energy but needs more time to start dispensing beverages.
The appliance is factory preset so that this setting is not enabled by default.
Stand-by Settings
To set the time interval for the machine to go into stand-by mode after the last brewing.
The default time value is «after 30 minutes».
The currently active setting is inside a dotted rectangular box.
15 minutes
Once the set time has elapsed, the machine goes into stand-by mode.
Press any button to turn the machine back on.
After performing the function diagnostics and the warm-up phase, the machine is again
ready for use.
When this parameter is set to "OFF", the machine stays active.
30 minutes
60 minutes
180 minutes
Off
ALARMS
It allows you to activate and deactivate some alarms.
Coffee grounds drawer full
alarm
This function allows you to enable/disable the dregs alarms, i.e. the warning on the
drawer with the already brewed coffee pods being full and its need to be emptied.
The currently active setting is inside a dotted rectangular box.
Off
alarm disabled
On
alarm enabled
Descaling
This function enables/disables the warning (no blocking) on the need to descale the
machine hydraulic circuit.
This alert is displayed by a special icon on the “Ready for use” screen (see page 57).
The currently active setting is inside a dotted rectangular box.
Off
With this setting, the warning message is disabled.
On
With this setting, the warning message is enabled;
the message will be displayed whenever the machine requires a descaling cycle.
QUICK CLEAN
This function allows you to enable/disable the “Quick Clean” alarm, i.e. the warning for
the Cappuccinatore quick clean cycle.
STANDARD CLEAN
This function allows you to enable/disable the “Standard Clean” alarm, i.e. the warning
for the Cappuccinatore standard clean cycle.
Exit
This option allows the user to go back to the menu top level
PRE-GRINDING
This function enables/disables the pre-grinding prior the next coffee dose.
This way, upon selecting the beverage, the user will already have the coffee powder
ready for brewing and will save the grinding time.
The currently active setting is inside a dotted rectangular box.
Off
With this setting, the pre-grinding function is disabled.
On
With this setting, the pre-grinding function is enabled;
Pre-brewing
This function adjusts the break time between pod pre-brewing and its actual dispensing.
The currently active setting is inside a dotted rectangular box.
Off
It disables pre-brewing
Содержание Royal OTC SUP060
Страница 80: ...Cod 59A023700 Ed 00...
