background image

English

8

41

8.3.3

Description of Messages in the Technical Menu

MENU ITEM

Description

Settings

This menu allows you to access all machine configuration parameters

Credits Menu

This menu allows you to activate the use of virtual credits, load them onto the machine, reset them and enable
the display of the “Ready for use” screen

ENABLE CREDITS

This function, if enabled, allows coffee brewing only if virtual credits have been loaded
onto the machine.
However, “hot water” can always be dispensed.
The currently active setting is inside a dotted rectangular box.

Off

This setting disables the virtual credits checking system

On

This setting enables the virtual credits checking system

Add Credits

This function allows you to load virtual credits onto the machine

Reset Credits

This function allows you to reset all virtual credits on the machine

yes
no
SHOW CREDITS

This function, if enabled, displays the number of available credits in the left bottom corner of the “Ready for
use” main screen.
The currently active setting is inside a dotted rectangular box.
NOTE:
If the “ENABLE CREDITS” setting is on “OFF”, the menu will not display the “SHOW CREDITS” option and
will automatically set it to “OFF”

Off

To disable credit display.
NOTE:
If the virtual credits are less than 30, the machine will in any case show the residual value
on the “Ready for use” screen

On

To enable credit display

Exit

This option allows the user to go back to the menu top level

BEVERAGE SETTINGS

This menu allows you to access the products’ dose adjustment function.

Espresso

An Espresso will be brewed once the length of the beverage has been saved

Coffee

A Coffee will be brewed once the length of the beverage has been saved

HOT WATER

Hot water will be dispensed once the length of the beverage has been saved

Cappuccino

A Cappuccino will be brewed once the length of the milk part and coffee part has been saved

Latte Macchiato

A Latte Macchiato will be brewed once the length of the milk part and coffee part has been saved

milk

A Frothed Milk will be brewed once the length of the beverage has been saved

AMERICAN COFFEE

You access the American coffee configuration submenu

BEVERAGE LENGTH

It allows you to set the total beverage length (values from 325 to 735)

WATER QUANTITY

It allows you to set the water percentage to be dispensed according to the total dose.
The currently active setting is inside a dotted rectangular box (LOW 30% / MED 50% /
HIGH 70%)

Exit

This option allows the user to go back to the menu top level

Exit

This option allows the user to go back to the menu top level

Machine Menu

This menu manages general machine operation and maintenance parameters.

General Menu

To change the machine operating settings.

Tone

This function allows you to activate/deactivate the sound when you press a button on the
keypad.
The currently active setting is inside a dotted rectangular box.

Off

To deactivate the acoustic alarms.

Содержание Royal OTC SUP060

















































































Отзывы: