Trouble
Possible causes
Solution
No message is displayed
The machine is not getting power
Turn the main switch on, check
plug and fuse
The service door is open
Close the service door
The automatic coffee brewing does
not start .
BREW UNIT MISS.
Properly fit and lock the central
unit
BREW UNIT BLOCK
Clean the central unit (see page
83)
WATERTANK EMPTY
COF. BEANS EMPTY
Fill with water or coffee beans and
restart the cycle
The automatic coffee brewing
DREGDRAWER MISS
Fit the coffee grounds containei
properly
GRINDER BLOCKED
Service the coffee grinder (see
page 84)
Water is dispensed instead of
coffee
Pre-ground coffee selection
button has been pressed, but the
relevant container is empty
Fill one measuring spoon of pre-
ground coffee
Steam and hot water are not
dispensed
The steam/hot water spout hole is
clogged
Clear the hole with the aid of a
thin needle
Coffee is dispensed too quickly
Grinding too coarse
Adjust the grinder on a finer
grinding, e.g. from 5 to 3
Coffee is dispensed too slowly
Grinding too fine
Adjust the grinder on a coarser
grinding, e.g. from 5 to 7
Coffee is not hot enough
The central unit filter is clogged
Clean the filter
The cup has not been preheated
Heat the cup on the heating plate
The temperature warning light is
not yet on
Wait the "Ready to be used'
message
Coffee is not creamy enough
The coffee blend is not suitable
Try another coffee blend
or is not fresh. Grinding is not
correct (too fine or too coarse]
The machine coffee brewing is re-
Descaling the machine
Descale the machine, as de
duced, it takes longer to heat and
scribed at page 84
the dispensing is not sufficient
The central unit cannot be re
The central unit has not been
Switch the machine on, close
moved
correctly positioned
the service door, fit the coffee
grounds container and wait until
the machine resets.
87
TROUBLESHOOTING
