background image

Important:

 Do not start the machine before the 

foreign body has been removed, otherwise  the 
motor may be damaged. Procedures: see page 
84, points 45-49. 

Cleaning and maintenance operations

 

General cleaning

 

To ensure a good coffee quality and a longer 
working life, always keep the machine clean. 

 

 

 
Do not immerse the machine into 
water or other fluids: it may be 
irreparably  damaged! 

 

 
Do not wash parts of the machine In 
the dishwasher! 
 

 
Always hand dry all parts of the ma 
chine, do not dry them in the oven 
or microwave oven! 

Water tank, drip tray, coffee grounds container 
and coffee dispenser

 

 39 

 In order to keep the service area and the 

central unit (22) clean, daily empty the coffee 
grounds container |1), after machine use. 

The water tank) 1 1), drip tray (2|, cup holder grill 
(3) and coffee grounds container (1) should be 
washed periodically, using a non-abrasive solvent 
and drying them carefully. 

 

40

 

 Coffee dispenser (4) may be removed for 

cleaning operations. Unloose the screws and rinse 
the dispensing tube thoroughly with hot water. 

From time to time, clean the machine casing with 
a damp cloth and dry it. 

Clean pre-ground coffee container (1 4) with the 
aid of the brush supplied, whenever necessary. 

Central unit

 

Clean central unit (22) whenever the coffee bean 
container is filled, or at least once a week. 

Switch off the machine and open service door 
(19). Remove grounds coffee container (1). 

 41 

 

 Remove central unit [22), by holding the 

handle and shortly pressing the PRESS key. 

Wash the central unit with hot water;

 do not use 

any solvent

 

 42 

 Make sure there are no coffee residues on 

the two steel filters: the upper filter can be 
removed by unloosening and turning the plastic 
pin anticlockwise using the tool supplied. Dry 
thoroughly each central unit component, fit the 
filter again and tighten it properly with the screw . 

 43 

 Remove coffee rest drawer (23) and clean it, 

using a non-abrasive solvent. Clean the service 
area thoroughly and fit the coffee rest drawer 
again. 

 

 44 

 By holding the central unit by its handle, slide 

it back into its original position, making sure it is 
correctly engaged. Then close the door. Fit the 
coffee grounds container again. 

 

When fitting the central unit, do 
not press "PRESS" button:

 

it may cause irreparable damages 
to the machine! 

Warning:

 if the central unit is not correctly fitted, 

the following message will be displayed: 

 
The machine cannot dispense coffee. 

Coffee grinder

 

                                                                               

Never fill the coffee grinder with 
water: it may irreparably damage the 

machine! 

Before cleaning the machine, turn off 
the main switch, unplug the machine 
and wait until it cools down. 

83

                          CLEANING AND MAINTENANCE OPERATIONS 

BREW UNIT MISS 

Содержание Royal Cappuccino SUP 016



























Отзывы: