Descaling
Move the asterisk at the end of the line to
menu item
"Descaling" and
select it by
means of the
ENT
key
The following message will be displayed:
ENT
key. From the displayed submenu it is
possible to select one of the following items by
means of the same keys . On the
contrary, if the hot water selection key i: is
pressed, the submenu can be quit.
The followinq messages will be displayed:
For descaling procedure, see page 84.
Timer
The timer enables the automatic switching off of
the machine after a preset period, which can be
set from 15 minutes to 12 hours after last
dispensing. If after a few seconds coffee is
brewed again, the timer is reset. If the value set
is 0:00, the timer function is not activated and the
machine does not switch off.
Move the asterisk at the end of the line to menu
item
"Timer"
by means of the keys .
Press
ENT
to select this item. The following
message will be displayed:
By means of the same keys , select the
suitable time and confirm the value through
ENT
button.
When the selected time is over the following
message is displayed:
Code programming
A code protects the access to the machine
counters; enter it for each programming section
and before carrying out any modification. As soon
as the code is entered, modifications can be
carried out without entering it again as long as
the programming function is enabled. The
machine is not supplied with a code. Keep to the
following indications for code programming:
By means of keys move the asterisk to
item
"VENDING"
and select it through the
ENT
key. The following message will be dis-
played:
The machine stops and can be switched on again
by means of button "standby".
Vending functions
Royal Professional is equipped with a counter
allowing the machine statistic analysis while
detecting the different dispensing operations. It is
also equipped with another counter which is able
to stop the-dispensing operations after a certain
number. These functions are protected by a
special access code.
By means of keys
move the asterisk to
item
"VENDING"
and select it through the
Enable it through the
ENT
key. The following
message will be displayed:
By means of keys enter the number to be set on
the first character and confirm the selection
through the
ENT
key. The entered number is
saved and the cursor moves automatically to the
following character.
After having entered the complete new code, it
is necessary to save it.
The following message will be displayed:
By means of keys the code can be saved
77
PROGRAMMING THE MACHINE
13 DESCALING
HOT WATER
TOTAL
COUNTER
LOCKING
1 SMALL COFFEE
TOTAL
COUNTER
CYCLES
CODE ****
1 LARGE COFFEE
TOTAL
1 COFFEE TOTAL
STANDBY
AFTER 0:00
16 VENDING
ENERGY SAVING
NEW CODE?
SAVE NO
CODE ****
