29
7
8
9
5
4
6
When the solution is
fi
nished the
following message appears on the
display:
Remove the water tank, rinse
with fresh drinking water to
eliminate traces of the descaling
solution, then re
fi
ll with fresh
drinking water.
The machine begins to dispense the
descaling solution through the hot
water / steam wand. The dispensing
occurs at predetermined intervals, in
order to allow the solution to settle.
The intervals are displayed as shown
above in order to check the progress
of the descaling cycle.
boiler descaling cycle
boiler descaling cycle
fi
ll water tank
When the above message appears,
the boiler is at the right
temperature.
fi
ll the water tank with the
descaling solution
fi
ll the water tank with the
descaling solution
Press the
key to start.
Pour the entire content of the Saeco
concentrated descaling solution into
the water tank, and then
fi
ll the tank
with fresh drinking water up to the
MAX level.
Place the tank back into the
machine.
To manage the different procedures correctly, the machine could need the knob to be turned on (ref.
) or off
(ref. ) during the different steps. When needed, turn the knob as indicated on the display.
