Place a cup under the dispensing
spout to collect rinsing water.
The coffee grounds
container full icon remains
displayed.
The coffee grounds container was
emptied while the machine was
switched off.
Always empty the coffee grounds
container while the machine is ON.
If the coffee grounds container is
emptied while the machine is
switched off, the coffee cycle
counter is not reset. In that case, the
'empty coffee grounds container'
message will stay on the display even
though the container is not full.
The coffee grounds container was
placed back too fast.
Do not place back the coffee
grounds container until the screen
message prompts you to put it back.
The brew group cannot be
removed.
The brew group is not positioned
correctly.
Close the service door. Switch the
machine off and back on again. Wait
for the machine ready screen to
appear and then remove the brew
group.
The coffee grounds container is not
removed.
Remove the coffee grounds
container before removing the brew
group.
The machine is still in the descaling
process.
You cannot remove the brew group
when the descaling process is active.
First complete the descaling process
and then remove the brew group.
The brew group cannot be
inserted.
The brew group is not in the correct
position.
The brew group was not put in rest
position before it was placed back.
Make sure that the lever is in contact
with the base of the brew group and
that the hook of the brew group is
in the correct position.
Reset the machine by switching it on
and off. Place the drip tray and the
coffee grounds container back.
Leave the brew group out. Close
the service door and switch the
machine on and off. Then try to
reinsert the brew group.
The coffee has too little
cream or is watery.
The grinder is set to a coarse setting.
Adjust the grinder to a finer setting.
The brew group is dirty.
Clean the brew group. For thorough
cleaning, follow the monthly cleaning
procedure with the degreasing
tablet.
38
English
