How to use the milk carafe
Note: Before first use, rinse the milk carafe as described in chapter 'Maintenance
and care', section 'Cleaning the milk carafe'.
Caution: Steam and hot milk may spray out of the milk froth dispensing spout
at the start of the brewing cycle.
Caution: Make sure that the milk carafe is installed and the milk froth
dispensing spout is open before you select a milk-based coffee beverage or
milk froth.
1
1
2
1
If the hot water dispensing spout is installed, press the release buttons on
both sides of the hot water dispensing spout (1) and remove it (2).
2
Remove the milk carafe lid.
3
Fill the milk carafe with milk between the MIN and MAX level indications.
Note: Use cold milk (at a temperature of approximately 5°C/41°F) with a
protein content of at least 3% to ensure an optimal frothing result. You can use
whole milk or semi-skimmed milk. It is also possible to use skimmed milk, soy
milk and lactose-free milk.
4
Slightly tilt the milk carafe and insert it into the guides of the machine. Then
push the bottom of the carafe towards the machine until it locks onto the
drip tray.
5
Pull out the milk froth dispensing spout completely to the right to froth
dispensing position.
Note: If the milk froth dispensing spout is not pulled out fully, the milk carafe
does not froth milk properly.
Brewing milk-based coffee beverages and milk froth
1
Place a cup under the open milk froth dispensing spout.
2
Choose your milk-based beverage.
- Press the CAPPUCCINO button to brew a cappuccino.
21
English