Saeco MAGIC M2, Руководство по эксплуатации и обслуживанию

Страница: 51 / 80

English
51
9
9.2 Warm-up and Rinsing
9
Upon start-up, the machine activates the warm-up
phase. Wait until it is completed.
99999
The bars advance and
show that the machine is
warming up the system.
99
Once warm-up has been completed, the machine
performs a rinse cycle of the internal circuits.
99999
The progress bar indicates
that
the machine is
performing the rinse cycle
of the system.
99
A small amount of water is dispensed. Wait until the
cycle is completed.
9
When the product selection screen appears, the
machine is ready to use.
9999
If the machine is used for
the first time or after a
long period of inactivity,
contact
the Service
Provider to start it up.
999
9.3 Rinse/Self-Cleaning Cycle
9
The cycle permits the internal circuits to be rinsed
with fresh water. The cycle is carried out:
99
For the coffee circuit
9
• When the machine is started;
9
•
During the Stand-by preparation phase if coffee was
dispensed when the power is turned on;
9
• After waking up from stand-by;
99
For the milk circuit (*only versions M2 and M1).
9
•
When the machine is started if milk was dispensed
when it was turned on previously;
9
• When waking up after stand-by if at least one milk
product was dispensed before going into stand-by;
9
• After a specific period of time following the last milk
product;
99
A small amount of water will be dispensed to rinse and
heat all the machine parts.
99