31
Inglese
1
The connection between the C.P.U. and the
programmer P 3000 is effected by means of a
cable; verify the position of the connector on the
connecting board (ref.1, fig.66).
fig. 66
es. b
es. c
Data are stored in the programmer until a new
configuration reading is carried out and/or when
the programmer batteries run out.
- To read the configuration, press in sequence:
F
ð
1
ð
1
ð
F
ð
1
ð
F
- To update the machine memory:
F
ð
1
ð
2
ð
F
ð
1
ð
F
ð
1
ð
F
D
Caution
Connect and disconnect the programmer to/
from the C.P.U. board with the distributor
switched off.
The following example b shows how to move
through the menu using the keys +, ENTER,
PRG.
The example here below shows how to perform
changes in programs:
The schemas illustrated above are valid as
example for all the menus.
Содержание GROUP 700
