Saeco GROUP 700, Инструкция по установке и эксплуатации

Страница: 10 / 56

Inglese
10
_
The instant product geared motor activates
the helicoidal screw conveyor so as to dispen
se the quantity of product programmed into
the mixer (in some versions more products can
be conveyed into the same mixer) (fig.13).
fig. 14
fig. 17
fig. 13
fig. 15
fig. 16
_
Once the pre-set quantity of water and powder
is dispensed, the motor-mixer is switched off.
ESPRESSO COFFEE
This process occurs after dispensing cup, sugar
and spoon.
_
The grinder is activated until it produces the
dose of ground coffee set by the doser (fig.14).
_
The doser electromagnet is activated, causing
the opening of the door and the consequent
fall of the coffee into the brew chamber (fig.15).
_
The rotation group geared motor starts-up,
brings it into the dispensing position and
simultaneously compresses the ground coffee
(fig.16).
_
The pump that delivers the required amount of
water -controlled by a special electronic device
(volumetric counter)- starts up, withdrawing
the water from the coffee boiler(fig.17).