Saeco GROUP 700, Инструкция по установке и эксплуатации

Страница: 20 / 56

Inglese
20
2
- Let the water flow out until it is clear (fig.40).
During the diagnostic the following parts are
activated sequentially:
- the coffee group, nozzle arm and sugar
conveyor in order to perform a correct start
positioning;
- the cup basket in order to perform the loading
of the first column of cups in the release
device;
- at the end of the diagnostic phase press the
pushbutton 2 on the CPU board to enable the
“Service “ mode (fig.42);
fig. 42
fig. 40
fig. 41
- Take out the key and close the faucet.
6.5.2 Water circuit filling
The machine automatically fills the hydraulic
circuit of the float reservoir and instant boiler (in
double boiler models) whereas the boiler filling
for the coffee group must be performed manually,
operating in “Service” mode.
The sequence of operations will be:
- Insert the proper key in the door switch
- When the machine is switched on, the
automatic filling of the float water reservoir
starts while the machine runs the automatic
diagnostic phase.
We suggest sometimes compressing the tube that
connects the boiler to the water reservoir so as to
eliminate eventual air bubbles that may be created
(fig.41).
- in the double boiler model, activate repeatedly
the “coffee in beans” selection by the “water
only test” button until the water flows out of the
coffee group dispenser (this assures that the
coffee boiler is filled);