background image

English

25

COINS ACCEPTED

CAPPUCCINO

LONG
ESPRESSO

ESPRESSO WITH
A DASH OF MILK

ESPRESSO

Button functions

1st BUTTON (UP button) : It is used to scroll up the menus and to increase the values

displayed during programming.

2nd BUTTON (DOWN button) : It is used to scroll down the menus and to reduce the

values displayed during programming.

3nd BUTTON (CLEAR button) : It is used to return to main programming menu 000. If

pressed during the programming mode, it reduces the value displayed to its minimum.

4th BUTTON (ENTER button) : It is used to display the values contained in the various menus, which can then be modified using the

UP and DOWN buttons. The same button is used to enter any changes. By pressing this button from the initial menu 000, it is possible
to exit the programming mode and the machine will be ready to dispense beverages.

Programming mode

To enter the programming menu, press button 26. The display reads 000. Beverage dispensing or any other machine function is no

longer possible. The machine will automatically exit the programming mode if it has been idle for about 1 minute and  return to beverage
dispensing mode.

Programming menu configuration

Values can be programmed in the following menus:

000 Power on/power off menu. It is accessed by pressing button 26 ; access to the other menus is possible using the UP button. To

quit this menu, press the ENTER button.

001 Price 1 (low price) menu. By pressing the ENTER button from this menu, the price 1 value is shown and can be modified.
002 Price 2 (high price) menu. By pressing the ENTER button from this menu, the price 2 value is shown and can be modified.

A-1 Channel 1 coin value menu. By pressing the ENTER button from this menu, the value of the coin accepted by the coiner channel

1 is shown and can be modified.

A-2 Channel 2 coin value menu. By pressing the ENTER button from this menu, the value of the coin accepted by the coiner channel

2 is shown and can be modified.

A-3 Channel 3 coin value menu. By pressing the ENTER button from this menu, the value of the coin accepted by the coiner channel
3 is shown and can be modified.

A-4 Channel 4 coin value menu. By pressing the ENTER button from this menu, the value of the coin accepted by the coiner channel

4 is shown and can be modified.

A-5 Channel 5 coin value menu. By pressing the ENTER button from this menu, the value of the coin accepted by the coiner channel

5 is shown and can be modified.

A-6 Channel 6 coin value menu. By pressing the ENTER button from this menu, the value of the coin accepted by the coiner channel
6 is shown and can be modified.

U Multi-product dispensing menu. This menu activates the standard or multi-product dispensing mode. By pressing the ENTER button,

the display reads 0, showing the standard dispensing mode. By pressing the UP button, the display reads 1, activating  the multi-product
dispensing mode.

With G13 coiners, the DA7P PLUS machine can be activated both into the multi-product dispensing and standard
dispensing mode. With G26 coiners, the DA7P PLUS can be activated into multi-product dispensing mode only. When
installing SaecoCard, the equipment  automatically sets to the multi-product dispensing.

Exit programming

Programming can be exited by pressing the ENTER button from the 000 menu. To enter the 000 menu, use either the DOWN button

to scroll down menu by menu, or the CLEAR button to have immediate access from any other menu to the 000 menu.

Selling price programming

Program price 2 first and then price 1.
From the 000 menu, press the UP button twice.The display will show 002.

Press the ENTER button to display and be able to modify the price 2 value.

By pressing the UP button, the value will be changed from 000 to the minimum coin value pre-set by the nation key corresponding

to  the  country of usage.

After entering the required value, press ENTER to confirm. The entered value is stored in the system memory and the display

automatically shows 002 again.

Fig. 18

UP button

DOWN button

CLEAR button

ENTER button

Содержание DA 7P Plus




















Отзывы: