English
7
4.3
Installed safety devices
All elements that can be source of danger, are placed inside the
vending machine.
-
A microswitch (ref.
32
, fig. 5) automatically turns off the power
supply when front door is open.
It is possible to deactivate the microswitch by inserting the key
(ref.
A
, fig. 5)
Danger
Deactivation of safety microswitch is allowed to Maintenance
technicians only.
Control panel keypad
(ref.
3
, fig. 1)
It is made of 12 keys whose function changes according to a
phase variation (ordinary or programming) in which the vending
machine is.
Each pressing of keys comes with a beep.
Dispensing phase
In this phase of normal operation, keys, if pressed, execute the
following operations:
E ENTER Key- “Decaffeinated”
(fig. 7)
It replaces coffee beans (Standard version) or instant coffee
(Instant version), with decaffeinated coffee.
Press the key before selecting the beverage.
In case of error, press the key again.
C CANCEL Key - “Cup”
It dispenses or not a cup according to programming set in
“
CUP SELLING
CUP SELLING
CUP SELLING
CUP SELLING
CUP SELLING
” function (see “7- Programming, 7.4
Description of menus” ).
According to selected setting you have to insert the proper
label (“
WITHOUT CUP
WITHOUT CUP
WITHOUT CUP
WITHOUT CUP
WITHOUT CUP
” or “
EMPTY CUP
EMPTY CUP
EMPTY CUP
EMPTY CUP
EMPTY CUP
” ).
The key then has two different functions:
-
“
WITHOUT CUP
WITHOUT CUP
WITHOUT CUP
WITHOUT CUP
WITHOUT CUP
”
Pressed key
Cup is NOT dispensed
Insert your cup into dispensing slot
Key NOT pressed
Cup is automatically dispensed
-
“
EMPTY CUP
EMPTY CUP
EMPTY CUP
EMPTY CUP
EMPTY CUP
”
Pressed key
Dispensed cup with payment
Press the key before selecting the beverage.
In case of error press the key again.
^ UP Key - “Sugar”
(fig. 7)
Increase quantity of sugar into selected beverage.
Press the key before selecting the beverage.
fig. 5
99588.05
A
32
fig. 6
99588.09
36
4.4
Efficiency control safety
microswitch
With the vending machine on, open front door and check that
display (ref.
2
, fig. 1) and lights on the Control switchboard go off
(ref.
3
, fig. 1).
Their turning off indicates that the vending machine is not working
and that the microswitch is efficient.
5 - CONTROLS AND
EQUIPMENT DESCRIPTION
Important
The vending machine is delivered with dispensing keys al-
ready programmed on standard values.
5.1
Main controls
Main switch
(ref.
36
, fig. 6)
It is located in the rear side of vending machine, bottom right.
In “
I
” position it turns on vending machine (enables electric
functions).
In “
O
” position turns off vending machine (disables electric
functions).
Содержание D.A. 8P Instant
Страница 40: ...Cod 0862 957 Ed 05 10 03...