Saeco D.A. 8P Instant, Эксплуатация и обслуживание

Страница: 20 / 40

English
20
7.2 Entry/exit from
programming mode
To access the programming you need to:
-
Open front door (ref. 1 , fig. 1).
- Insert key to activate safety microswitch (ref. A , fig. 5).
- Open coiner support plate (ref. 19 , fig. 1).
- Press programming entry/exit key (ref.
TS1
, fig. 8).
If no password was assigned you access directly into pro-
gramming.
If vending machine was assigned a password to enable the
programming, “
PASSWORD 0000 PASSWORD 0000 PASSWORD 0000 PASSWORD 0000 PASSWORD 0000 ” will appear on dis-
play with a flashing cursor on the first digit, then you need to:
- Digit the password using “UP” and “DOWN” keys.
Important
Each digit has to be confirmed with “Enter” key.
- At each confirmation, the flashing cursor will move to next
digit.
Proceed the same way until the last digit
- After last digit has been confirmed “
SYSTEM MANAGE- SYSTEM MANAGE-
SYSTEM MANAGE- SYSTEM MANAGE- SYSTEM MANAGE-
M E N T M E N T M E N T M E N T M E N T
” will appear on display.
- Scroll menu items using “UP” and “DOWN” keys.
To leave the programming mode you need to:
-
Scroll menu items using “UP” and “DOWN” keys until one of
the main items (
SYSTEM MANAGEMENT SYSTEM MANAGEMENT
SYSTEM MANAGEMENT SYSTEM MANAGEMENT SYSTEM MANAGEMENT ,
P A Y M E N T P A Y M E N T
P A Y M E N T P A Y M E N T P A Y M E N T
S Y S T E M S Y S T E M
S Y S T E M S Y S T E M
S Y S T E M
,
BEVERAGE PREPARATION BEVERAGE PREPARATION
BEVERAGE PREPARATION BEVERAGE PREPARATION
BEVERAGE PREPARATION
,
P R I C E P R I C E
P R I C E P R I C E
P R I C E
MANAGEMENT MANAGEMENT MANAGEMENT MANAGEMENT MANAGEMENT
,
TIME MANAGEMENT TIME MANAGEMENT TIME MANAGEMENT TIME MANAGEMENT TIME MANAGEMENT
,
STATIS- STATIS- STATIS- STATIS- STATIS-
T I C T I C T I C T I C T I C / C O U N T E R C O U N T E R C O U N T E R C O U N T E R C O U N T E R ) is displayed.
- Press programming entry/exit key (ref. TS1 , fig. 8).
After three minutes from last operation, vending machine exits the
programming mode.
7.3 Parameter change
and storage
To display parameter to be modified you have to:
-
Access programming (see “7.2 Programming mode entry/exit“).
- Scroll main menu items using “UP” e “DOWN” keys.
- Stop the selection on the item that manages the desired func-
tion.
- Press “Enter” key to enter the item.
- If necessary, scroll functions with “UP” e “DOWN” keys.
- Stop the selection on the function you need to display or modify
the parameters.
- Press “Enter” key to display the parameter.
Important
In some cases parameters are already modifiable at this level
(see “7.1 Programming structure” ).
To modify and memorise the parameter you need:
Important
Entered digits and modified parameters have always to be
confirmed with “Enter” key.
- Press “Enter” key to access the modification.
Parameter is ready to be modified when cursor appears under
the first modifiable digit.
- Increase or decrease digit value using “UP” o “DOWN” keys.
By pressing “Enter” key the displayed digit is memorised and
replaces the previous one, simultaneously cursor moves to next
digit.
- Execute the same procedure to set the remaining digits.
- After modification of digits is complete, confirm the new pa-
rameter using “Enter” key.
When cursor disappears, variation is accepted.
In some cases the parameter to be stored has to be selected among
a list of preset parameters (“
Y E S Y E S
Y E S Y E S
Y E S
” and “
N O N O
N O N O
N O
” , “
D A Y S O F D A Y S O F
D A Y S O F D A Y S O F
D A Y S O F
W E E K W E E K W E E K W E E K W E E K
” , etc…). In these cases “UP” and “DOWN” keys have
the function to scroll the cursor or display possible choices.
Example of parameter setting
“
MIN. TEMPERATURE MIN. TEMPERATURE
MIN. TEMPERATURE MIN. TEMPERATURE
MIN. TEMPERATURE
”
To set the function you need to:
-
Access the programming (see “7.2 Programming mode entry/
exit” ).
- Scroll main menu items with “UP” and “DOWN” keys and
stop the display on “
SYSTEM MANAGEMENT SYSTEM MANAGEMENT SYSTEM MANAGEMENT SYSTEM MANAGEMENT SYSTEM MANAGEMENT ”
- Press “ENTER” to confirm the selection and enter into the menu
item
- Scroll the functions with “UP” and “DOWN” keys until “
M I N . M I N . M I N . M I N . M I N .
TEMPERATURE TEMPERATURE
TEMPERATURE TEMPERATURE TEMPERATURE ” appears.
- Press “ENTER” to confirm the selection and enter into the func-
tion.
A cursor appears under the parameter first digit.
- By means of “UP” or “DOWN” keys, scroll numbers
- Press “ENTER” to confirm the number.
Pressing “ENTER” will automatically send to function entrance
level (“
MIN. TEMPERATURE MIN. TEMPERATURE
MIN. TEMPERATURE MIN. TEMPERATURE MIN. TEMPERATURE ”).
- Press “CANCEL” to go back to “
SYSTEM MANAGE- SYSTEM MANAGE-
SYSTEM MANAGE- SYSTEM MANAGE-
SYSTEM MANAGE-
M E N T M E N T M E N T M E N T M E N T ” key.
- Exit programming menu (see “7.2 Programming mode entry/
exit” ).