Saeco CAP020, Эксплуатация и обслуживание

Страница: 108 / 228

English
10
108
10.2.4 Cleaning the Drip Tray and
Relative Grill
Remove the drip tray from the machine and wash it under
running water, paying particular attention to the grill.
10.2.5 Cleaning the Coffee Grounds
Drawer
Remove the drip tray, remove the coffee grounds drawer
and wash it under running water.
10.2.6 Cleaning the Steam and Hot
Water Wands
(Except for COFFEE set-up)
Clean the spouts with a soft damp cloth.
If the nozzles are clogged, the final section of the
dispensing spouts can be unscrewed and a pin can be used
to free the nozzles.
10.2.7 Cleaning the Cup Warming
Surface
Use a non-abrasive damp cloth to clean the cup warming
surface.
10.2.8 Cleaning the Containers
To clean the coffee bean hopper, follow the procedure below:
• Close the coffee bean hopper partition.
• Brew a few coffee cups as a test, to remove the coffee
beans from the coffee grinder;
• Remove the screws from the container by using the tool
supplied.
• Lift up the container and remove the bean residues using
an aspirator;
• Wash the inside of the container and dry it carefully
before reassembling it.
To clean an instant products container, follow the instructions below:
• remove the container;
• wash the inside of the container and dry it carefully before
reassembling it;
10.2.9 Cleaning of the Cappuccinatore
Never clean the
Cappuccinatore when the
machine is in “STANDBY”
mode.
The CAPPUCCINATORE
must be cleaned every
time it is used, to avoid the
solidification of deposits.
All the removable parts
must be washed and rinsed
under running water.
To clean each part of the Cappuccinatore group
separately, remove:
• the top protection cover, by pulling it outwards;
• remove the Cappuccinatore, by pulling it outwards;
• the fork;
• the crema adjusting lever;
• the temperature adjusting lever;
• the Cappuccinatore body cap;
• the fitting connecting the suction tube to the body of the
Cappuccinatore;
• the milk dispensing spout;
• the milk suction hose.