• 31 •
Machine Installation - Service Provider Manual
9
Press the "
" button (21) to access.
ACTIVATE FILTER?
ACTIVATE FILTER
YES
NO
Note: To exit the procedure, press the "
" but-
ton (22).
10
Press the "
" button (21) to continue.
INSERT FILTER.
FILL THE TANK
ACTIVATE FILTER
11
Remove the tank from the machine and empty it. Remove
the small white fi lter from the tank and store it in a dry place
sheltered from dust.
12
Put the fi lter into the empty tank. Press it to its limit stop.
13
Fill the tank with fresh drinking water and reinsert it into the
machine.
14
Press the "
" button (21) to confi rm the introduction of
the new fi lter.
PLACE A CONTAINER
UNDER THE
WATER SPOUT
ACTIVATE FILTER
15
Place a large container under the hot water wand
(Fig.07,
page 3)
.
16
Press the "
" button (21) to confi rm.
Wait until the machine stops dispensing the necessary water to
activate the fi lter.
ACTIVATE FILTER
At the end of the cycle, remove the container previously placed
under the hot water wand.
Note: At the end of the procedure, the display
automatically returns to the product brewing
screen. If the water fi lter is not available, insert the small
white fi lter previously removed (see step 11) into the
tank.
