Saeco AROMA SM, Инструкция по эксплуатации и техническому обслуживанию

Страница: 13 / 33

40
English
7. FUNCTION / USE AND
PROGRAMMING
INTRODUCTION
The programming software permits the checking of the
following operations:
- handling of 2-3-4 coffee units
- simultaneous function of both coffee and tea units
- cappuccino/milk function
- volumetric check on coffee measures
- timed tea measure check
- simulated measure programming
- filling level check and control
6.5 Replacement of the thermostat to
reduce the coffee dispensing group
temperature.
Remove cup heating bowl (1). Disconnect group thermostat
(2) (Code WGADM1561 – T 103°C) and replace it with
the lower temperature thermostat ( Code WGADM2067
- T 93°C), included in the machine equipment.
- system supervision through alarms
- continuos, delivery time-out and further functions
- serial connection with accounting devices
- 16 X 2 LCD display (not rear-lit) for functional state
display.
Important: the last selection made always appears on the
display
6.6 Spouts included in the
supply.
No. 4 spouts are supplied with the machi-
ne to dispense one or two coffees.
The figure (beside) shows the different
distances from the cup-holding tray (H),
depending on the different types of spouts
fitted on the filter holder.