20
Repairs / Maintenance
In case of failure, problems or a suspected fault resulting from
the falling of the machine, immediately remove the plug from
the socket.
Never attempt to operate a faulty machine.
Servicing and repairs may only be carried out by authorised
specialists.
Repairs must be carried out only by an authorised service centre.
All liability for damages resulting from work not carried out by
professionals is declined.
Fire Safety Precautions
In case of fi re, use carbon dioxide (CO
2
) extinguishers. Do not use
water or dry powder extinguishers.
Key to Machine Components
1
Water tank
2
Water tank lid
3
Power button
4
Brew button
5
Steam button
6
Hot water / steam knob
7
Brew unit
8
Steam wand
9
Power cord
10
Water recovery tray + grill
11
Coff ee bean hopper cover
12
Coff ee bean hopper
13
Grinder adjustment knob
14
Coff ee brewing conveyor
15
Coff ee grinder operation button
16
“Machine on” light
17
“Machine ready” light
Accessories (possible variations according to the diff er-
ent models)
18
"Crema" fi lter holder
19
"Crema" fi lter for fi lter holder
(single piece for 1 or 2 coff ees)
20
Measuring scoop
21
2-coff ee fi lter for brass fi lter holder
22
1-coff ee fi lter for brass fi lter holder
23
Brass fi lter holder
4 INSTALLATION
For your own and other people safety, carefully follow
the "Safety Regulations" indicated in section 3.
4.1 Packaging
The original packaging has been designed and manufactured to
protect the machine during transport.
We recommend keeping the packaging material for possible
future transport.
4.2 Installation
Instructions
Before installing the machine, read the following safety
instructions carefully:
• Place the machine in a safe place.
• Make sure children cannot play with the machine.
• Do not place the machine on hot surfaces or near open
fl ames.
The coff ee machine is now ready to be connected to the electric
network.
Note: We recommend washing the components
before using them for the fi rst time and/or after
they have not been used for a certain period of time.
4.3 Filling the Water Tank
•
(Fig.24) -
Remove the cover from the water tank (2).
• Remove the water tank (1) by pulling it up. Pay attention
not to damage the pipes inserted in the tank.
•
(Fig.25) -
Rinse and fi ll it with fresh water taking care not to
overfi ll.
•
(Fig.27) -
Reinsert the tank into its seat and reposition the
pipes previously removed.
Important Note: On some models the tank is
equipped with water intake valve. When the
tank is removed, this valve automatically closes to pre-
vent water from spilling out. Once inserting the tank,
press gently.
• Replace the tank cover.
SAFETY REGULATIONS - INSTALLATION
