Sacmi CCM001, Руководство пользователя, Страница: 83 / 164

002AZ001A
6 - 11
OPERATING INSTRUCTIONS
6
6.5.3 DOUBLE PRODUCT DETECTION
DESCRIPTION
A proportional inductive sensor secured to the upper frame detects the position of the actuator once the product has
been formed. The product is determined to be double, heavier than the standard weight, equal to the standard weight,
lighter than the standard weight or missing (not deposited) according to this position. If a double product is detected,
the machine performs the emergency cycle illustrated in the flow chart below.
DIAGRAM
1 double product detected
2 pellet insertion in die in question stopped
product ejected
4 feed restarted
next detection: die empty
3
next detection: double product
5 counter activation
counter control > 3
6 end of cycle
RESET
As seen in the flow diagram, the above mentioned safety feature causes the machine to stop in the order for end of
cycle. No product is inside the tools except for the detected double product.
Proceed as follows:
- Turn the mode selector to SET-UP.
- Open the safety guards.
- Locate and remove the double product.
- Close the safety guards.
- Turn the mode selector to AUT.
- Reset the machine with key 0.
- Restart the machine with key 1.