Sacmi CCM001, Руководство пользователя, Страница: 153 / 164

002AZ001A
8 - 47
MAINTENANCE
8
T2545
1
4
2
3
5
6
8.1.2.11 Cooling system
8.1.2.11.1 Checking the coolant level
- Make sure the coolant level does not fall below the low level mark indicated on gauge (1). If the level is near or below
minimum add coolant as directed below.
8.1.2.11.2 Adding coolant
- Unscrew the cap (2).
- Add coolant (see paragraph 2.3.1 - SPECIFICATIONS) until the full level mark is reached.
- Screw on cap (2).
8.1.2.11.3 Cleaning the filters
- Close the valve (4).
- Remove the thermocouple (5).
- Loosen the filter (3) and place a container on the underlying parts to protect them from the fluid that may flow out.
- Remove the filter cartridge and blow air to clean.
- Carry out the operations in reverse order to put the parts back in place.
8.1.2.11.4 Changing the coolant
- Unscrew the cap (2).
- Detach the hoses from the fittings (6) and open the cock to let the coolant out. Collect the coolant in a container.
- Close the cock and attach the hose to the fitting.
- Pour in oil through the hole in the cap (2) in the percentages indicated in paragraph 2.3.1 - SPECIFICATIONS.
- Close the cap (2).
Figure 8.1.2.11 - COOLING SYSTEM