Sacmi CCM001, Руководство пользователя

Страница: 37 / 164

002AZ001A
2 - 23
MACHINE FEATURES
2
2.3 TECHNICAL DATA
2.3.1 SPECIFICATIONS
EXTRUDER kg/h
50 100 150 200
PRODUCTION OUTPUT
Pieces/minute up to 600 600 600 600
AIR
Required delivery rate (at 0.5 MPa) dm 3 /1' 450 450 450 450
Consumption (at 0.5 Mpa) dm
3
/1' 200 200 200 200
Minimum required pressure MPa 0,5 0,5 0,5 0,5
Hose to air mains diameter mm 17 17 17 17
POWER
Thermal power to be dissipated kcal/h 22.000 28.000 36.000 42.000
Power requirements (50 Hz) kVA 105 174 204 229
Power for cable sizing (50 Hz) kVA 57 95 112 125
Maximum electricity absorbed (50 Hz) kW 35 55 65 73
Average electricity absorbed (50 Hz) kW 30 45 55 62
COOLANT (****)
Demineralized water (***) 86% 86% 86% 86%
Polypropylene glycol 10% 10% 10% 10%
Syneco FTR-S protective fluid (**) 4% 4% 4% 4%
Temperature 10
°
C 10
°
C 10
°
C 10
°
C
Pressure MPa 0,3 0,3 0,3 0,3
Flow rate l/1' 90 115 145 168
Average consumption (10 ° C) l/1' 75 95 120 140
PRODUCT
Type of plastic PP - HDPE - LDPE
Temperature of molten plastic up to 280
°
C 280
°
C 280
°
C 280
°
C
Dimensions and weights
See product specifications
Number of cavities 32 32 32 32
Minimum speed of rotation rpm 8,5 8,5 8,5 8,5
Maximum speed of rotation rpm 18,75 18,75 18,75 18,75
Forming cylinder stroke mm 115 115 115 115
Maximum forming force kN 20 20 20 20
Color change time min 25(*) 25(*) 25(*) 25(*)
(*) Approximate time, varies according to type of plastic and color..
(**) antibacterial product that prevents corrosion and incrustation.
E0004P
WARNING!
THIS IS NOT AN ANTI-FREEZE.
EMPTY THE CIRCUIT COMPLETELY IF THE MACHINE IS SUBJECT TO TEMPERATURES BELOW 2
°
C.
(***) Demineralized water with hardness less than 5 ° F.