Saci Pumps emotion MT2-11A, Руководство по установке и обслуживанию

Страница: 44 / 262

44
EN
5.01
5.02
5.04
5.05
5.08
5.09
5.10
5.11
5.12
5.13
5.15
5.14
5.16
5.17
Spanish
English
French
Italian
Portuguese
German
Bar - PSI - mwc
-1
5
10
25
0
1
10
25
1
1
OFF
OFF
10
40
50
65
MAX PUMP
PRESSURE
8
100
50
10
200
72
72
Spanish
Bar
Wizard
Wizard
25
50
0
8
10
49,5
2
2
24
24
Bar
Bar
Bar
Hz
Hz
Bar
Sec
Hz
Sec
Sec
Hours
Hours
Dutch
Polish
Russian
Swedish
You can select between different languages for the menu and the warnings.
Units of working pressure on display.
Value of pressure transducer at 4mA
Value of pressure transducer at 20mA
Minimum frequency at which you allow the pump to work
Maximum frequency at which you allow the pump to work
Pressure boost at the maximum frequency of pump
Maximum number of pumps that can function in the system simultaneously
Time from the moment the main pump is working at a speed below the stop
frequency (parameter 1.6) until it stops fully.
When the pump in operation reaches this frequency it sends a command to the
auxiliary to start up.
Time from when a system of two or more pumps is working below parameter 1.6
until the auxiliary pumps stop.
Time from the moment the condition of parameter 5.09 occurs until the auxiliary
pump starts.
Parameter to set time period for changeover between pumps.
Parameter to set time period for periodic start-up of pump.
If the pump is inactive for this set time period it will rotate at minimum frequency
for 2 or 3 times.
LANGUAGE
UNITS OF PRESSURE
TRANSDUCER PRESSURE
MIN VALUE (4 mA)
TRANSDUCER PRESSURE
MAX VALUE (20 mA)
MINIMUM WORKING
FREQUENCY
MAXIMUM WORKING
FREQUENCY
PROPORTIONAL BOOST
MAXIMUM NUMBER OF
PUMPS ON
MAIN PUMP STOP DELAY
AUXILIARY START
FREQUENCY
AUXILIARY STOP DELAY
AUXILIARY START DELAY
CHANGEOVER TIME
PUMP KICK INTERVAL
5. ADVANCED PARAMETERS
Max. Min. Default
Units Description Par.
Programming
Notes
5.18 Not used
Not used
Total Stop
Total Stop INV
Local Stop
Local Stop INV
IN Setpoint
IN Setpoint INV
Flow Sensor
Flow Sensor INV
Slave 0-10V
Selecting “Not used” will not affect the system.
We can use the digital input as a system start-stop or only one pump start-stop
choosing the Total Stop or Local Stop options.
It can also be used as a different default set pressure in the same way. Choosing IN
Setpoint you can be select another different set pressure on parameter 5.19.
Flow Sensor option is used when a flow sensor is available, which will stop the pump.
Slave 0-10V option is used if a 0-10V active device or a potentiometer (passive
device) is connected to the 0-10V input.
Note: INV options are used for NC inputs.
DIGITAL INPUT 1