SAC ROTO-PRESS 1095, Руководство оператора и каталог запасных частей

Страница: 14 / 54

Page # 14
SETUP
1.) When you receive your new ROTO-PRESS from the factory, it is not immediately necessary
to check the machine for bearing lubrication, or chain tightness as these items have been fac-
tory serviced. It is recommended to walk around the machine and familiarize yourself with the
location of all moving parts, caution decals, the general operating dimensions, and the basic
working features of the ROTO-PRESS.
CAUTION! BEFORE OPERATING THIS MACHINE, READ AND
UNDERSTAND THIS OWNER’S MANUAL AND ALL CAUTION, WARNING AND
DANGER SYMBOLS LOCATED ON THE MACHINE AND IN THIS MANUAL.
2.) All lubrication has been completed at the factory prior to delivery, and will not be imme-
diately necessary. The oil bath has been fi lled to the proper level. Take note that the oil does
not run any higher than approximately halfway up the very lowest part of the drive chain. All
bearings should be greased according to the enclosed lubrication schedule.
IMPORTANT! DO NOT OVER GREASE BEARINGS, SEAL FAILURE AND
SUBSEQUENT PREMATURE BEARING FAILURE COULD RESULT.
OPERATION
CAUTION! BEFORE ATTEMPTING TO RUN THE ROTO-PRESS CHECK THE
AUGER CHAMBER FOR FOREIGN MATERIAL. MAKE SURE THAT All
SHIELDS ARE IN PLACE, AND THAT ALL SAFETY DECALS ARE
UNOBSTRUCTED.
1.) Pick a tractor large enough for your application. Too big is better than too small. Hay or
cracking requires 130 hp. Ground ear corn or snaplage requires 115 hp. Shell corn requires 80
hp. Fuel tank on tractor should be full before starting. Hook up the tractor to the bagger.
2.) Before you begin to set-up the ROTO-PRESS, pick a suitable location for the bag(s). The
location should be well drained, smooth, fairly solid; long enough for the size bags you are
using and easily accessible for both fi lling and unloading. Check the length and remember
that the tractor and bagger take approximately 40-50 feet extra. Also, a slight uphill incline
is preferred; however, you should not be on a side hill. If there is a choice of bagging uphill or
downhill, always bag uphill. Remember that these are only recommendations, it can be done
almost anywhere.
READ CAREFULLY
USING YOUR ROTO-PRESS