SAC ROTO-PRESS 1095, Руководство оператора и каталог запасных частей

Страница: 15 / 54

Page # 15
3.) Position the ROTO-PRESS in a straight line with the tractor in the direction that you want
to bag, making sure that the wheels of the tractor are pointed straightforward. See Figure
1. Keep checking the tractor wheels while fi lling the bag, making sure they are straight at all
times. Many people will grab the steering wheel when getting out of the cab. Try not to do
this. Also, when positioning the tractor and bagger, leave enough room to put the bag on. This
requires 10 to 15 feet.
TRANSPORT LIGHTING
1.) When you receive your ROTO-PRESS, the transport lighting should be in the open position.
This means that the lights are visible from the rear of the machine. Once you have positioned
the machine for bagging, you must change the lights.
From the front of the machine, located behind the wheels is where you will fi nd the light
assembly. Pull the pin holding the light assembly and pull the assembly toward you until it
bumps against the stop. Replace the pin back into the additional hole in the light assembly
bracket to hold the light assembly in the closed position.
2.) Before transporting the machine to a new location, reverse the process as described
above.
It is very important to reposition the lights each time the machine is transported.
LIGHT ASSEMBLIES
USING YOUR ROTO-PRESS