background image

Page # 11

   

877 1st Ave. N.W. | Sioux Center, IA 51250 | Toll Free: 1.866.722.1488 | siouxautomation.com

OPERATION

REPLACEMENT PARTS

READ complete manual CAREFULLY

BEFORE attempting operation.

• 

Comply with state and local laws governing highway safety and movement of farm machinery on public roads.

• 

Use approved accessory lighting, flags and necessary warning devices to protect operators of other vehicles on 

highway during transport. Various safety lights and devices are available from your dealer.

• 

Use of flashing amber lights is acceptable in most localities. However, some localities prohibit their use. Local laws 

should be checked for all highway lighting and marking requirements.

• 

When driving tractor and equipment on road under 20 m.p.h. (40 kph) at night or during day, use flashing amber 

warning lights and a slow moving vehicle (SMV) identification emblem.

• 

Plan your route to avoid heavy traffic.

• 

Be a safe and courteous driver. Always yield to oncoming traffic in all situations, including narrow bridges, inter-

sections, etc.

• 

Be observant of bridge load ratings. Do not cross bridges rated lower than gross weight at which you are operating.

• 

Watch for obstructions overhead and side to side while transporting.

• 

Always operate equipment in a position to provide maximum visibility. Make allowances for increased length and 

weight of equipment when making turns, stopping unit, etc.

SAFETY

HIGHWAY AND TRANSPORT OPERATIONS

Содержание MAXI-MIXER 4700 TRAILER

























































Отзывы: