SABROE SAB 283 Скачать руководство пользователя страница 31

Страница: 31 / 78

Power supply

DANGER

HIGH VOLTAGE

Before removing or opening any electrical enclosures, covers, plates, doors or working on any electrical

circuits, place the main switch of the compressor/unit in the "OFF" position and lock it. Dismantle the

main fuses to the compressor unit.

An electrician must analyse the electrical system to determine the possible use of power retaining

devices such as capacitors. Such power retaining devices must be disconnected, discharged, or

made safe before maintenance is performed.

Lubricating oils

Compressor oils include the following oil types:

Table 11: Compressor oil types

Code design

Oil types

Mineral oil, naphtenic base

Synthetic oils based on alkylated aromatics (alkyl-benzene)

Synthetic oils blended from alkyl-benzene and poly-alfa-olefin base stocks

Semi synthetic oils (hydro-treated mineral oil on paraffinic base)

PAO

Synthetic oils based on poly-alfa-olefin

POE

Synthetic oils based on polyol esters

PAG

Synthetic oils based on polyalkylene glycols

Synthetic oils based on alkylated naphthalene

For the recommended type of oil, refer to SABROE oil.

WARNING

When charging oil, follow the safety instructions given by the oil supplier (

MSDS: Material Safety Data

Sheet

). Always avoid direct contact with the oil as this may cause skin allergies. Always use protective

equipment, goggles, and gloves, when charging oil.

When changing oil on the compressor or draining oil from the vessel of the refrigeration plant,

always collect the used oil in containers marked “waste oil,” and send them to an approved

hazardous waste disposal site. It is not recommended to reuse oil.

Refrigerants

Use caution when dealing with refrigerants. For safe handling, refer to the safety data sheets and

other relevant material delivered by the refrigerant supplier.

SAB 283-355 A-Frame OHU 6042 and OHU 7650 (including ATEX) Screw Compressor Unit

Содержание SAB 283















































































Результаты поиска

Содержание SAB 283

Отзывы:

Бренды по названию

Популярные бренды

SABROE SAB 283, Руководство по эксплуатации

Результаты поиска

Содержание SAB 283

Отзывы:

Бренды по названию

Популярные бренды