16
Operating the Phantom
This procedure will set the FBX Feedback Exterminator filters
and will increase your gain before feedback. These FBX filters
are all fixed filters - once Ready Mode is engaged they are fixed
in their location, width, and depth. They are no longer adaptive,
and there are no dynamic filters available with the Phantom.
These are not necessary because your podium mic should not
be moving during the program! The Phantom will provide be-
tween two and four FBX filters depending on system acoustics.
1. Make sure the Phantom is installed as described in “Install-
ing the Phantom” previously.
Do not talk into the mic during
this setup procedure. Setup Mode is for setup only. Turn
down the gain for this mic and mute all other mics on your
mixer.
2. Using the Phantom Tool press and hold the FBX button for
three seconds. The
amber
LED will flash continuously when
you have held it long enough. Let go of the button. The LED
continues to flash.
3. You are now in Setup Mode. Slowly raise the gain for this mic until
you hear the first feedback tone. You will hear a pulsing sound mo-
ments before the feedback filters are set - this helps indicate the FBX
FBX Setup
GP
+
HH
TM
Содержание PHANTOM MIC RIDER PMR-GP1
