SABINE PHANTOM MIC RIDER PMR-GP1, Руководство по эксплуатации

Страница: 15 / 28

15
Operating the Phantom
The Phantom is designed to be ready to go in a minute or two.
First you will set the Phantom’s microphone sensitivity to match
your microphone, then your FBX Feedback Exterminator filters,
and you can even make an adjustment to the Proximity Effect
and Plosive controllers.
1. Make sure your Phantom is installed as described in “In-
stalling the Phantom” shown on pages 6 - 13.
2. Using the Phantom Tool press the SEN button momentarily
and you will see the red LED flash. This indicates the current
setting. Factory default setting (#2) is indicated by two quick flashes.
3. Refer to the Microphone Sensitivity chart on page
23 of this Operating Guide to find your microphone’s
specification for sensitivity and make a note of the
Phantom setting for your mic.
4. Press the SEN button again and you can cycle
through the three settings: Setting #1 (Low), #2 (Me-
dium), and #3 (High). When you arrive at your de-
sired setting simply wait and that setting will become
active when the LED stops flashing and turns to
green .
You can verify your setting by repeating Step 2.
Match Microphone Sensitivity
GP
+
HH
TM