20
IR Gate Setup
(continued)
Operating the Phantom
4. If the person using the mic walks more than six feet away
from the mic, the mic will remain on for about 15 seconds,
after which it will be muted, indicated by the LED turning off.
5. You can disable this Gate function by simply unplugging
the sensor’s jack from the Phantom. The LED will now be
green.
6. You can also disable the IR Gate by removing the secu-
rity cover and pushing the IR button for 3 seconds. The
amber
LED will flash two times to indicate “disabled” and
one time to indicate “enabled.” These settings toggle each
time you press the IR button.
7. You can also re-enable the IR Gate by unplugging and
replugging the sensor while the mic is turned on (green LED
lit). This will defeat any setting you made using the IR but-
ton.
8. NOTE: The mic stays on continuously when the IR Gate
is disabled.
GP
GP
+
HH
GP
TM
Содержание PHANTOM MIC RIDER PMR-GP1
