Bluetooth operation
You can listen to music from a Bluetooth-enabled device via this player�
Note:
– The operational range between this player and a Bluetooth device is approximately 8 meters
(without any object between the Bluetooth device and the unit)�
– Before you connect a Bluetooth device to this unit, ensure you know the device’s capabilities�
– Compatibility with all Bluetooth devices is not guaranteed�
– Any obstacle between this unit and a Bluetooth device can reduce the operational range�
– If the signal strength is weak, your Bluetooth receiver may disconnect, but it will re-enter pairing
mode automatically�
Pair Bluetooth-enabled Devices
1� Press the
button on the main unit or press the
BT/AUX
button on the remote control to
select
BT
(Bluetooth) mode� “
NO BT
” will show on the display if the unit is not paired to any
Bluetooth device�
2� The system has entered pairing mode�
Handling
Do not touch the playback side of discs�
Hold discs by the edges to avoid leaving fingerprints on the
surface�
Any dust, fingerprints or scratches may cause a malfunction�
Never attach a label or sticky tape to the disc�
Storage
Put disc back in their case after playing them� Never expose disc
to direct sunlight or heat sources� Never leave discs inside a car
parked in full sunlight�
Cleaning
Use a clean soft lint-free cloth to clean the discs, working from
the centre outwards in a straight line� Do not use solvents such
as petrol, thinners, commercially available cleaners or antistatic
sprays for vinyl records�
– Or press and hold the « /
PAIR
» button on the remote control or the « » button on the unit
to be searchable� The display will show “
PAIR
”�
3� Activate your Bluetooth device and select the search mode� “
SABA JULY CI
” will appear on your
Bluetooth device�
4� Select “
SABA JULY CI
” in the pairing list� The system is successfully connected and the display
panel shows “
BT
”�
5� Play music from the connected device�
– To disconnect the Bluetooth function, switch to another function on the unit or disable the function
from your Bluetooth device� Or press and hold the « /
PAIR
» button on the remote control, the
Bluetooth device will be disconnected from the unit� The display panel shows “
NO BT
”�
Tips:
– Enter “0000” for the password if necessary�
– If a connection exist, press and hold « /
PAIR
» button on remote control or the « » button
on the unit to re-activate the pairing mode, the connection will be interrupted� The display will
show “
PAIR
”�
– If no other Bluetooth device pairs with this player within two minutes, the player will recover its
previous connection�
– The player will also be disconnected when your device is moved beyond the operational range�
– If you want to reconnect your device to this player, place it within the operational range�
– If the device is moved beyond the operational range, when it is brought back, please check if the
device is still connected to the player�
– If they are connected, display panel shows «
BT
»�
– If the connection is lost, display panel shows «
NO BT
»� Follow the instruction above to pair your
device to the player again�
Listen to Music from Bluetooth Device
– If the connected Bluetooth device supports Advanced Audio Distribution Profile (A2DP), you can
listen to the music stored on the device through the player�
– If the device also supports Audio Video Remote Control Profile (AVRCP), you can use the player’s
remote control to play music stored on the device�
1� Pair your device with the player�
2� Play music via your device (if it supports A2DP)�
3� Use supplied remote control to control play (if it supports AVRCP)�
– To pause/resume play, press the button on the unit or the /
PAIR
button on the remote
control�
– To skip to a track, press the H,G buttons on the unit or on the remote control�
131
130
GB
GB
