CD/USB operation
CD Operation
1� Tap the
icon repeatedly on the unit or press the
CD
button on the remote control to select
DISC
mode�
2� Tap the
button on the unit or press the
button
on the remote control and the disc tray will open
automatically�
3� Place the CD/MP3 disc with the label side up into the
CD compartment, and then tap the
button on the
unit or press the
button on the remote control to close the disc tray�
– The total number of tracks will be shown on the display, and unit will play the first track on the
CD/MP3 disc automatically�
– If there is no disc or the disc can’t be read, “
NO DISC
” will show on the display�
USB Operation
1� Insert the USB device�
2� Press the
button on the main unit or press the
USB
button on the remote control to select
USB
mode�
Play Control
– To stop play, press the L button on the remote control� The total tracks of the CD will show on the
display�
– To pause or resume play, press the button on the unit or the /
PAIR
button on the remote
control�
– To skip to the previous/next track, press the
/
buttons on the unit or on the remote
control�
– Press and hold the
/
buttons on the unit or on the remote control to perform fast
forward/ reverse playback� Release the button to resume normal playback�
Random Playback
•
During play, press the
SHUFFLE
button, unit will randomly play the song�
Intro Playback
•
Press the
INTRO
button on the remote control� The unit will play the first 10 seconds of each track�
•
Press the
INTRO
button on the remote control again to resume normal playback�
Select repeat play options
1� Press the
REPEAT
button repeatedly on the remote control to select
Repeat
play modes� The
selected mode will show on the display�
–
RPT ONE
: Repeat current track� “
” blinks�
–
RPT ALB
: Repeat folder (only for MP3/WMA Playback)� “
” blinks�
–
RPT ALL
: Repeat all tracks� “
” lights up�
–
RPT OFF
: Repeat turned off�
Programme Setting
The user can programme up to 20 tracks in CD/USB mode in any desired order� Programme mode is
activated while in
STOP
mode�
1� Press the L button on the remote control�
2� Tap the
PROG
button on the remote control to enter
MEMORY
mode�
3� Press the number (0~9) buttons or
/
buttons on the remote control or on the unit to
select the track that you want to preset, then press
PROG
button to confirm�
4� Repeat step 3 to programme more tracks�
5� Press the button to playback programme tracks�
Note:
– If you want to change the programed files, press the L button two times to clear the current
program files, display shows «
PRG CLR
», then repeat the program steps as above to re-enter the
new program files�
– Or opening the CD door to clear the current program files�
About the Discs
Do not move the unit during playback
– During playback, the disc rotates at high speed�
– Do not lift or move the unit during playback, as doing so may damage the disc or the unit�
When moving this unit
– When changing places of installation or packing the unit for moving, be sure to remove the disc
and return the disc tray to its closed position in the player� Then, press the power switch to turn
the power off before disconnecting the power cord� Moving this unit with the disc loaded may
result in damage to this unit�
129
128
GB
GB
