ENGLISH
ENGLISH
GB-2
7
GB-2
6
3. Wash the head, the container and lids with
water.
4. After the cleaning, dry the water dispenser
with a dry soft cloth.
5. Screw back the head in clockwise direction.
Revisser la tête dans le sens des aiguilles
d’horloge.
6. Re-install the dispenser back on the door,
push the container until you hear a click
sound.
Head
Small lid
Large lid
WARNING!
When inserting the water container, ensure the
head sits correctly into the hole first.
Filling water
Before you fill the drinking water into the water
container, ensure that the water container is
steady and placed into a correct position.
To prevent water from overflowing and spilling,
fill the water container below the maximum level
mark which is approximately about 4.0 L. There
are two ways to fill the water container:
1. By removing the small lid and fill water from
the inlet of the large lid.
2. By removing the large lid of the tank, and
then fill water directly.
CAUTION!
Do not fill any other liquid than water inside the
water container.
Lock
Before you dispense the water, ensure that the
dispenser is in “unlock” position.
WARNING!
The lock feature is used to lock the device. Don’t
push strongly the dispenser lever when the
dispenser is in “lock” position, this may damage
and break the dispenser.
