24
iii.
On Time: use number keys to input your
wakeup time. Once the time’s up, no
matter what the system is in standby
mode or in playing mode, the system will
automatically switch to the channel you
want and start to play.
iv.
Duration: After you set a time for
“Duration” item, once the time’s up, the
system will automatically switch to
standby mode. If you want not work this
function, set the duration is
00:00
.
When you select “Message” (reminding
message) option in “Timer Service”, the
screen will display like below:
v. Wakeup Message: press [Volume Up /
Volume Down] key to select reminding
message as Birthday, Anniversary and
General.
vi. Date, you can use number key to input your
wakeup date.
vii. On Time: use number keys to input your
wakeup time. Once the time’s up, no matter
what the system is in standby mode or in
playing mode, the system will automatically
pop a reminding message.
viii. The message will always display on the
screen, you can press [Exit] key to close it.
ix. Press [exit] key to exit the current menu.
11.6 Miscellaneous Settings
When you enter to “
Miscellaneous Settings
” menu,
you will see a screen like below:
1
Subtitle Auto: You can press [Volume Up/Volume
Down] key to select “On” or “Off”. If the current
channel has subtitle information, it will be showed
up automatically while this function is “ON”, if this
function is “OFF”, you need turn on the subtitle
manually by press [Yellow] key.
2
Auto Power Down: You can press [Volume Up/
Volume Down] key to select the time or “Off”, if you
select time, duration this time if no any operation
on receiver, it will go to standby mode.
3
Panel Power In Standby:
if set to “ON”, the front
panel will display time or some other
information in standby mode; if set to “OFF”,
it will display nothing in standby mode.(Note:
this function only available when the “Deep
Standby” item is set to “ON”)
4
Loop Control: if set to “ON”, the receiver will
enable SCART LOOP and TUNER LOOP function,
if set to “OFF”, will disable this function.
5
Standby Mode: if set to “Real”, Press power
key receiver will be in real standby status, the
consumption will less than 1 Watt.(Note: the
“Panel Power In Standby” item need set to
“OFF”); if it’s set to “Fake” ,Press power key,
receiver will be in fake standby status.