20
“Satellite Guide” is use for user to enter local
longitude; local latitude and satellite longitude.
By the evaluation from the receiver evaluate the
antenna azimuth and antenna elevation; user
can follow this guidance to adjust antenna.
1
You can use number keys to input
parameters in “Local Longitude”, “Local
Latitude” and “Satellite Longitude”.
2
You can use [Left/Right] key to select east
or west in “Local Longitude” and “Satellite
Longitude”, select north and south in
“Local Latitude”.
3
Moving highlight to “Start” item and press
[OK] key. The lower column on the screen
will calculate the corresponding value
automatically.
4
Orientation means the angle between
south and satellite.
Press [Exit] key to draw back to “Main” Menu.
10.5 Terrestrial Installation (Optional)
Press [OK] key to enter the selected item.
You can select the Bandwidth according different
country.
You can set the Tuner Power ON/OFF.
Press
[Red]
key can directly into blind scan
mode to scan the current programs.
Press [Green] key to enter the following menu.
Scan Mode.
1 There are two modes. You can scan channel by
channel or by frequency”.
2
When scan band is UHF and region is “France”,
the range of Ch No. is from 21 to 69. When scan
band is VHF and region is “France”, the range of
Ch No. is from 1 to 9. (it’s according to region)
3
Press [Red] key to enter blind scan menu, or press
[Green] key to enter TP scan menu.
4
Press [Exit] key to exit the scanning.
11. Preference
When you enter to “Preference” menu, you will
see the screen like below:
In “Preference” menu:
Press[Channel Up/Channel Down]key to
select menu items among Language,