Button Head Cap
Screw M4x10mm
(HC100-S)
Button Head Cap
Screw M4x10mm
(HC100-S)
BAG15
TAIL BOOM ASSEMBLY
To fit the tail belt, loosen the tail case by loosening the 4 M3 screws (
Figure 1
).
*Install the belt onto the tail front pulley, checking the direction of rotation.
*Insert and tighten the four M4 screws of the boom plate.
*Rotate the tail drive several times by hand.
*Tension the tail case by hand and slowly tighten the 2 BLACK screws in (
Figure 2
).
NOTE:
To disassemble the tail boom, you have to remove the 4 M4 screws.
DO NOT
loosen the 3 M10 plastic screw.
Page 22
TAIL BOOM ASSEMBLY
