Saadat Dena, Руководство пользователя

Страница: 58 / 61

53
Guidance and manufacturer's declaration – Dena 1210 emissions
The Dena 1210 is intended for use in the electromagnetic environment specified below. The
customer or the user of the Dena 1210 , should assure that it is used in such an environment.
Emissions test Compliance
Electromagnetic environment -
guidance
RF emissions
CISPR 11
Group 1
The Dena 1210 uses RF energy
only for its internal function.
Therefore, its RF emissions are very
low and are not likely to cause any
interference in nearby electronic
equipment.
RF emissions
CISPR 11
Class B
The Dena 1210 is suitable for use in
all establishments, including
domestic establishments and those
directly connected to the public low-
voltage power supply network that
supplies buildings used for domestic
purposes.
Harmonic emissions
IEC 61000-3-2
Complies
Voltage fluctuations/ flicker
emissions
IEC 61000-3-3
Complies
Guidance and manufacturer's declaration – electromagnetic immunity
The Dena 1210 is intended for use in the electromagnetic environment specified below. The
customer or the user of the Dena 1210 should assure that it is used in such an environment.
Immunity test Port Compliance level
Electromagnetic
environment -
guidance
Electrostatic discharge
(ESD) IEC 61000-4-2
Enclosure
±8 kV contact
± 2 kV, ± 4 kV, ±
8 kV, ±15 kV air
Floors should be
wood, concrete or
ceramic tile. If floors
are covered with
synthetic material, the
relative humidity
should be at least
30%.
Patient coupling
Signal input/output parts
Electrical fast
transient/burst IEC
61000-4-4
Input a.c. power
± 2 kV, 100 kHz
repetition
frequency
Mains power quality
should be that of a
typical commercial or
hospital environment.
Signal input/output parts
± 1 kV
100 kHz
repetition
frequency
Surge
Input a.c. power
± 0,5 kV, ± 1 kV
Line-to-line
± 0,5 kV, ± 1 kV,
± 2 kV Line-to-
ground
Mains power quality
should be that of a
typical commercial or
hospital environment.