29
The following information are printed on the recorder paper:
■
Recording type (Auto, Manual)
■
Recording mode
■
Date and time
■
HR value
■
Recording speed
■
ECG lead, gain and filter
■
System model
■
Software version
Do not open the recorder door during recording. This can
damage it.
During the recorder operation the record paper exits
steadily. Pulling the paper will damage the recorder.
.
Be careful when loading the paper in the recorder. Avoid
damaging the thermosensitive printhead. Do not touch
thermosensitive print head.
.
It is recommended to use the paper with coloured marks
intended to aware user that the paper is near to finish. Otherwise
user should ensure that sufficient paper has been fed to the
recorder before recording.
.
The paper detector may not operate properly if covered with
foreign matter. Therefore, if you find foreign matter on the
sensor, remove it and clean the sensor.
.
If the paper is jammed, open the recorder door and remove
the paper. Do not pull the paper out by force.
.
Содержание Dena
Страница 1: ...SAADAT Co User Manual Dena Electrocardiograph D00948 V1 Dena 1210 Linux...
Страница 7: ...1 Section 1 General Warnings Please refer to this section for overall safety information...
Страница 26: ...20 Lead Placement Diagram Figure 2 9 Lead placement diagram...
Страница 34: ...28 Open the recorder door Place the paper roll in the compartment Close the recorder door firmly...