Saab 340B, Руководство по эксплуатации

Страница: 460 / 670

FLIGHT CONTROLS
Operation
Aircraft Operations Manual
8.2
PAGE 2
Apr 01/15
CONDITIONS NORMAL PROCEDURES
(Cont’d)
5. Actuate both STBY ROLL trim switches on pedestal to L and R positions
and check STBY ROLL trim indicator to move towards corresponding posi-
tions. Reset to 0.
− Check that STBY ROLL trim can not be operated by just one switch.
6. Actuate both YAW trim switches on pedestal to L and R positions and
check YAW trim indicator to move towards corresponding positions. Reset
to 0.
− Check that YAW trim can not be operated by just one switch.
2.3 FLAP SYSTEM
TEST
Check flap area to be free from obstructions.
CAUTION
2.4 FLAP SYSTEM
TEST
Check and set flaps as follows:
1. Flap handle FULL DOWN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
− Check flap indicator pointers to move simultaneously to correct indication.
2. Flap handle 20

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
− Check flap indicator pointers to move simultaneously to 20

3. FLAPS test switch PRESS AND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
HOLD
− Check flaps test light to come on.
− Set flap handle FULL DOWN and then UP and check in both positions that
the flap indications do not respond and that the FLAPS caution light and the
FLAPS test light start flashing.
− Release FLAPS test switch.
− Check FLAPS caution light and FLAPS test light to go out.
− Check flap indicator pointers to move simultaneously to 0
