11
W I R E L E S S R E M O T E O P E R A T I O N
The RF remote system requires no complex programming and is shipped ready to use. In the event that
another PT-6002 or similar device is installed nearby and is operating on the same pairing code, that code
(A-P) may be easily changed by choosing another via the 4 position DIP switch package found inside the
battery compartment of the remote. The receiver board inside the control panel will also need to be
changed to match.
Note:
The default code as shipped is Code A on both the remote
and the receiver.
Sleep Mode
To conserve battery power, the remote will enter standby mode
when no function has been selected for 30 seconds or more. To wake
the remote, simply press the ‘1, 2, S, or M’ button momentarily. The
indicator will light up solid for 5 seconds indicating that it is ready to
transmit. A rapidly flashing indicator indicates that a command signal
was sent to the control panel.
To Turn On Using the Wireless Remote Operation: Zone 1
Push the button marked (1) ‘ON/OFF – COLOR CHANGE’ to toggle
on and off the power of Zone 1 on the PT-6002.
To Turn On Using the Wireless Remote Operation: Zone 2
Push the button marked (2) ‘ON/OFF – COLOR CHANGE’ to toggle
on and off the power of Zone 2 on the PT-6002.
Color Changing Operation
To change LED pool light colors simply toggle the power OFF, then
ON using the button marked ‘1’ or ‘2’ for independent zones or ‘M’
for both zones’ within 1 second. Continue toggling until the desired
color or light show is reached.
NEW FEATURE
1-Button - Color Sync / Reset Operation
(For use only with SR Smith LED kēlo, Mod-Lite, Treo, FG, Treo Micro
& LED water features)
To color synch lights in a multi-light installation (on the single zone),
simply press the “S” button once and wait 15 seconds. During this
time, the lights will flash on and off several times, pause in the off
mode, then finally resume at color mode 1 (soft color change).
Performance Note:
For best results, hold the remote
vertically (pointed at the sky) when pressing the
command buttons.
PAIRING CODE CHART
DIP Switch
1
2
3
4
Code A
OFF
OFF
OFF
OFF
Code B
ON
OFF
OFF
OFF
Code D
OFF
ON
OFF
OFF
Code C
ON
ON
OFF
OFF
Code E
OFF
OFF
ON
OFF
Code F
ON
OFF
ON
OFF
Code G
OFF
ON
ON
OFF
Code H
ON
ON
ON
OFF
Code I
OFF
OFF
OFF
ON
Code J
ON
OFF
OFF
ON
Code K
OFF
ON
OFF
ON
Code L
ON
ON
OFF
ON
Code M
OFF
OFF
ON
ON
Code N
ON
OFF
ON
ON
Code O
OFF
ON
ON
ON
Code P
ON
ON
ON
ON
Содержание Power Tower PT-6002
Страница 2: ...2...