700-8000
September - 2010
6
7. Thread the bolts into the Seat Pad (13),
through the Frame Assembly (1) and the Seat
Assembly (2), using Qty. 4 ea. ¼”-20 x 2 ½” Hex
Head Bolts (6), and 5/16” Round Nylon Washer
(14). Make sure all bolts are fully tightened.
8. Check the seatbelt for proper functionality -
thread loose end of belt strap through buckle -
pull tight - to close - press latch down on belt
material.
USING THE MAC—MOBILE AQUATIC CHAIR
Obey all User Instructions listed in the Owners Manual whenever using the MAC. Obey all Caution,
Warning, Operating Instruction(s) and Labels located on the MAC whenever using. It is the
responsibility of the MAC Owner to ensure that the correct safety procedures have been put in
place and a risk assessment carried out.
If a User is mentally challenged or has severe physical
disabilities these issues must be taken into account to determine the number of persons required
to complete the transfer onto the seat and the number of persons required to be in the water,
ready to receive the User. If the MAC will be used by a disabled person living on their own, a
communication device should be installed in the area of use to call for assistance in the event of
an emergency. Only persons healthy enough for water activities should use the MAC. Users
should consult with their physician to determine if water activities are appropriate for the User.
Keep fingers and hands clear of wheels and other moving parts during use.
TRANSFERRING
Once the unit is positioned for use, use the following procedure to transfer to the seat and into the water.
Only persons healthy enough for water activities should use the MAC. Users should consult with their
physician to determine if water activities are appropriate for the User:
•
Ensure that the MAC is in a safe, level position.
•
Fully engage both brakes – locking the wheels.
•
Transfer onto the seat, ensuring that the User’s weight is centered on seat. Ensure arm rests are
rotated to the fully up position during transfer. If User has a wheelchair, keep the wheelchair close
by for easy retrieval. Lower arm rests after transfer.
•
Fasten Seat Belt - thread loose end of belt strap through buckle - pull tight - to close - press latch
down on belt material.
•
MAC can be operated by the User or with assistance.
•
Move the MAC down the ramp and into the pool.
•
Unfasten Seat Belt - grasp latch and lift up, pull loose end from latch.
•
Exit MAC.
•
When finished, return to the seat, ensuring user’s weight is centered on seat.
•
Fasten Seat Belt.
•
Exit pool by moving up the ramp. Rear stabilizing wheels will insure that the User does not tip
backwards.
•
Fully engage both brakes – locking the wheels
•
Unfasten Seat Belt or optional Stability Vest.
•
Rotate armrests up.
•
Transfer off of the seat.
