700-8000
September - 2010
4
MAC - PRODUCT COMPONENTS
AC0000 Component Description
The MAC is made up of several components:
Unibody Frame Assembly –
Supports the Seat Assembly and contains the turning/moving elements of
the MAC.
Footrest –
Provides support for the User’s feet while seated in the MAC. The side rails are tapered to
increase the comfort and support for the User’s legs as well.
Swivel Casters –
The front small wheels swivel to allow for easy turning and greater maneuverability.
Anti-Tip Wheels –
These small wheels at the rear of the MAC are designed to keep the MAC from
tipping backwards while climbing an incline and to provide added stability while in the water.
Push Handle –
Provides an easy and convenient method for a person to move the MAC, with or without
a User in the chair.
Arm Rest –
Provides support during transport, and can be rotated up out of the way during transfer.
Manual Wheels –
The large wheels used during transport. They have easy to grip handles that allow for
controlled movement.
Brake –
Each Manual Wheel has a brake mounted in front of it. Both brakes must be fully engaged
whenever the User is transferring into or out of the MAC, and fully engaged when the MAC is being
stored.
Seat Assembly-
The seat is manufactured from roto-molded plastic with a stainless steel frame. The
MAC comes standard with a seat belt for added safety. The seat belt must be used during operation. It is
recommended that the seat be rinsed off with fresh water between each use and cleansed daily with a
disinfectant solution of 1:100 dilution of household bleach to fresh water and then rinsed with fresh water.
In the event of a contamination incident such as patient/user excreta - cleanse seat and seatbelt
immediately with the above disinfectant solution. Do not use seat or seatbelt if it is damaged or becomes
worn out.
Push Handle
Anti-Tip Wheels
Seat Assembly
Arm Rest
Manual
Wheels
Brakes
Footrest
Swivel Casters
Frame Assembly
