INSTALLATION MANUAL
EDGE DIVING SYSTEM
9
srsmith.com
You MUST refer to the Edge Diving System installation manual for proper jig placement locations, minimum diving
envelope requirements and installation information.
Refer to these instructions only when using a 6 or 8 foot Edge aquaBoard together with a Board Fall water feature.
1. WATER STUB-UP DETAILS:
If installing a BOARD FALL, ensure that a 1/2” (minimum) water stub-up conduit is located within the area designated. (Fig. 1) Provide
a minimum of 10 gallons per minute water flow for the BOARD FALL water feature. NOTE: Maximum water supply is 1-1/2” PVC.
To ensure plumbing conduit will not hit the inside of the base, the stub-up must not exceed 4” in height.
2. BOARD FALL DETAILS:
The BOARD FALL water feature will work with a 6 or 8 foot Edge aquaBoard™. NOTE: Minimum 10 GPM water supply recom-
mended. Please see detailed installation instructions for dive stand installation information and requirements.
BOARD FALL CONFIGURATION:
BOARD FALL: kit includes Board Fall, Mounting Hardware (4 screws), 8’ & 4” of 1/2” Flex PVC Pipe, 1-Union
Fig. 1
toward pool --->
INSTALLATION INSTRUCTIONS: Edge Diving System WITH Board Fall Unit
