background image

 

7

 
As an AquaBlast

TM

 & RocketRide

TM

 FunSlide

TM

 owner, it is your responsibility to explain 

the nature of this danger to all persons who may use your AquaBlast

TM

 & RocketRide

TM

 

FunSlide

TM

, since they may not otherwise appreciate the dangers of performing head 

first slides. 
 

 

DAILY/WEEKLY MAINTENANCE OF THE AquaBlast

TM

/RocketRide

TM

 

FUNSLIDE

TM

 

 

1.  When hosing down the deck, hose your AquaBlast

TM

 & RocketRide

TM

 FunSlide

TM

  

to wash away any dust, dirt or other debris, which may have accumulated. 

2.  Be sure that water fittings are not leaking, and clean spray nozzles periodically to 

permit water to be sprayed on the slide runway. 

3.  All anodized aluminum parts require little maintenance.  Hose and wipe to clean. 
4.  While cleaning aluminum parts, check and see that all nuts and bolts are tight 

and secure. 

5. The 

INTENDED USE LABELS

 shall be maintained on the ladder and the transom of 

the slide entrance as indicated to the right.  If they become faded or un readable 
they should be replaced.  Additional labels are available from S.R. Smith upon 
request.  (see FIGURE S). 

 
 
 
 
 
 
 
 
 
 
 
 
 
 

DO NOT SLIDE HEAD FIRST

FIGURE R 

250 LBS. WEIGHT LIMIT

LOOKOUT FOR PEOPLE AND OBJECTS BELOW

SLIDE FEET & ARMS FIRST

IN SEATED POSITION

ONLY ONE PERSON AT A TIME

CAUTION

WARNING

CORRECT

SITTING SLIDE

FIGURE S 

Содержание AQUABLAST









Отзывы: