79-15016-00 REV. E1
www.srsmith.com
Page 3 of 3
HOW IT WORKS
Before switching on the 6004-AS illuminators, make sure color wheel switch is in “OFF” position.
Turn on the power to the illuminators, the color wheels will rotate to the “HOME” position. This
action takes about 15 seconds. At this time, all AS units should be holding on the same color.
After the color wheels have reached their home positions, the color wheels can be switched on.
The units should now be in sync. When shutting down the system, always turn the color wheel
OFF so the next time the lights are turned on, the color wheels can return to their home position
again, assuring synchronization.
Lamp “Restike”
When turning the system off and then turning it immediately back on, it
may take 1 to 3 minutes before the lamp comes back on.
This process allows the lamp to cool down and then restart. This is a
normal function of the Metal-Halide lamp system that the SR Smith
6004 / 6004-AS illuminator uses.
6000 Series Warranty
The 6000 Series Warranty covers all failed components in the unit under recommended use for
the first three (3) years from the original installation date. Should any components fail within the
warranty period, only the first year from the original installation date shall the labor fees be
covered. In the event that the entire unit itself requires replacement within the Warranty period,
the entire unit must be returned to SR Smith or any SR Smith Authorized Service Center.
The RM6000 remote control; has a separate warranty and does not fall under this
6004/6004-AS illuminator warranty coverage.
This warranty applies only to the original owner for as long as they own the 6004 / 6004-AS
illuminator. This warranty is non-transferable.
